An Industrial Mall
: +91 261 2890920
: +91 9898053939
CG Drive -
Simple to Use ... Compact to fit Power to Perform O.25kW to 45kW AC inverter
SIMPLE TO USE ...
CG Drive-SK is an easy drive - easy to connect, easy to configure and easy to install. Easy to connect - All connectors are generously sized and clearly labelled. Easy to configure - The configuration settings you need for most applications are detailed on the front facia of the drive. Easy to install - Flexibility allows you to install the drive in the best way for your application.
All drive sizes can be mounted on a flat surface
DIN rail fixing integrated on small sizes
Provision for "through hole mounting" is standard above 4kW
This allows the heat from the drive to be dissipated externally meaning the size of the cubicle can be greatly reduced.
Sensorless Vector Drive, speed or torque control
Automatic no spin auto tune for rapid performance optimization.
Output frequency 1500 Hz
Speed reference input 0-10V, 0-20mA, 4-20mA (-10V to +10V SM I/O lite option)
Switching frequency from 3 kHz to 18 kHz - quiet motor operation
Mod-bus RTU RS485 via RJ45 connector is standard
DC injection braking as standardDynamic braking transistor as standard
Maximum Overload 150% of rated current for 60s
8 preset speeds, flying start & mains dip ride through
Very Compact,Simple to use and Flexible range
Dynamic Braking Built-in for entire range
PLC functionality built-in with lot of Input/Outputs
Built-in EMC Filter
Communication Port (RS 485) as standard
BUilt in DC Choke form 5.5 kW Onwards
East to setup- all paramaters you need for typical applications are shown on the fornt facia.
Easy Installationn- Choose between simple panel mounting & DIN Rail Mounting.
Display key pad inculded as standard.
Unbetable Performance- Try it! Compare it!
© Copyright by
R.Manilal & Sons